The reference in planters which combines precision and versatility.
Available with electric drive (according to models)
Maize, Sugarbeet, Sunflower, Rapeseed,Beans, Soyabeans, Sorghum…
37,5 to 80 cm
4 to 18 rows
Traditional or low-till
Launched in the 70’s in the United States the notion of planting resting on the ground directly in line with the seed drop or « American system of planting » exists in MONOSEM since 1989. But since 20 years, the NG Plus has not ceased to progress to further meet with your requirements.
A DESIGN which makes all the difference
INCOMPARABLE PLANTING QUALITY AND OPTIMAL DEPTH CONTROL
The clod removers or the trash wheels clean the way for the future planting line pushing out clods, stones or trash.
The double discs open the furrow at a depth defined by the gauge wheels.
The tip finishes the bottom of the furrow for an optimal seed placement.
The curved seed chute tube has been specially designed to accompany the seeds gently into the ground and with a perfect accuracy
The rear press wheel unit, made up of 2 V-wheels, closes the furrow around the seed for optimal seed germination.
The metering unit is the major component of the MONOSEM planter. MONOSEM has conserved on the NG Plus 4 the best of the NG Plus units and has added the operating comfort. Adjustments are made easier for a planter that is always perfectly adjusted enabling planting in optimal conditions.
The heavy-duty parallel linkage with a large travel is mounted on interchangeable bushings. Two springs stabilize the metering unit.
Each metering unit is equipped with an audible safety clutch system with automatic clutching for optimal protection of the metering system.
The adjustment of the clod removers is precise (12 positions) and rapid due to the adjustment system with locking pins.In order to suit different planting conditions, the clod removers are rapidly interchangeable with the trash wheels and this with no tool.
The planting system is made up of two large diameter discs (380 mm) mounted on sealed ball bearings. Together with the inner shoe, this system ensures a constant depth control and planting quality no matter what the planting conditions.
Large depth gauge wheels (110 mm) ensure an efficient and uniform depth control. Resting on the ground directly in line with the seed drop ensures the unmatched depth consistency that makes the reputation of the NG Plus.
The bracket arms of the gauge wheels are assembled on interchangeable bushes. They are helically fluted for a good grease distribution.Scrapers are standard assembly on the gauge wheels.
The large PRO wheel with a large diameter (295 mm) offers high quality pressing and excellent seed placement. By improving the seed-to-soil contact, the emergence is more rapid and regular.
The rear press wheel unit gives better clearance in sticky conditions.
The depth adjustment is easily made using a hand wheel. This type of adjustment ensures a great control precision of the planting depth even for small seeds at a shallow depth. The depth adjustment index is visible straight away from the rear. It is weather-proof.
The hopper in high resistance, transparent plastic has a capacity of 52 litres.The cover locks so will not close during filling, even in windy conditions.
The front facing of the metering unit integrates the passage of the vacuum hose and the seed monitor and signal kit cables.
The NG Plus 4 range is now marketed in an electirc driven version, NG Plus 4E:
One motor for each metering unit
Controls the seed drop and the distance between the seeds
High quality planting demands a good distribution system. This is why MONOSEM offers all their know-how in order to give you an accurate, simple and extremely reliable distribution system. This high quality manufacturing has made the MONOSEM metering system a worldwide name. Today for your planting, you too can demand the MONOSEM reference.
The metering box is made from cast aluminium. Year after year the metering will always be just as accurate and this no matter the variations in temperature.
The wear gasket in Teflon is in permanent contact with the disc. It ensures the sealing of the disc and it is interchangeable.
The stainless steel discs 1,5 mm thick are very rigid. The agitator, fixed on to the disc stiffens the unit. The changing of the discs is easily made without tools. A complete range of discs for all precision seeds is available.
The brass scraper avoids doubles. A spring on the metering box cover maintains the selector perfectly in place against the disc for optimal selection, even with small seeds.
The cover in alloy is specially designed for planting with a minimum of seeds.
The distribution system is easily accessible, for both adjustments and control. A large transparent window allows for control of the selection after the selector.
The new emptying trapdoor offers easier operating. Open the trapdoor and it stays open enabling, with the emptying auger supplied as standard equipment, an even easier and more efficient emptying.
3 m 00
4 m 50
6 m 10
3 m / 4 m 50
3 m 10 / 4 m 50
6 m 00
9 m 00
8 m 70
12 m 50
3 m 50
3 m 10
Integrated transport carriage
Weight maize planter only
3 300 kg
Number of rows, maize
Inter-row spacings, maize cm
75-80 (6 rows)
540 rpm PTO
450 rpm PTO
1000 rpm PTO
PTO universal joint
2 x (6.5x15)
4 x (6.5x15)
2 x (26x12)
4 x (26x12)
8 x (6.5x15)
Seed spacing gearbox
Standard (16 settings)
Lateral (20 settings)
Hydraulic row markers
Row cut-off system
○ on carriage
Bro_NG PLUS 4_90100_EN_2017
NG Plus 4
Pneumatic planter with double discs